Products

 
 
 
 
 
 
 
 
 
 
 
 
 

PSC Motor controls

ECM Motor controls

The LA-120 is our Low Ambient head pressure stabilizing control.

This control maintains proper head pressure in cold weather. They are used for air conditioner condenser fans and pump motors in ground source heat pump systems. Often used as a service tool when charging systems in cool weather rather than “tenting” in cool weather.

Available in 120 volt and 240 volt versions

The  FAC-120 is designed for Funace and AirConditioning Control.

This Indoor fan control, regulates the speed of the blower as heating and cooling supply temperatures change. It can be operated in the continuous mode or auto mode. It vastly improves comfort and balance of any HVAC system. It is a must for the maximum efficiency of all IAQ products and for humidity removal during A/C.

Available in 120 volt and 240 volt versions

The HP-120 is desinged for Heat pump control.

There isn’t a heat pump that was ever installed that can’t be vastly improved by the installation of the HP model FanHandler. Heat right away instead of that cold heat pump draft that seems to last forever. This control lowers the balance point temperature and increases heat pump efficiency.

Available in 120 volt and 240 volt versions

The ecMModulator is a full spectrum ecm control.

This control is for all types of equipment. All the abilities of all FanHandler controls contained in one package. The perfect answer to replacing psc motors and modernizing all equipment.

Available in 120 volt and 240 volt versions

ecMModulator 4Z

The ecMModulator 4Z contains all the features of the ecMModulator 4. In addition, it very accurately controls duct pressures in zoned HVAC systems. This control eliminates the need for a crossover duct and pesky bypass dampers, greatly improving the efficiancy of your zone system!

Available in 120 volt and 240 volt versions
0
0
0
s2sdefault
powered by social2s

Testimonials

  • Mr. Peters,

    just had the Fan Handler installed on 10/26/2010. The contractor recommended that I use the "fan on" option, immediately I noticed the drastic reduction in sound as the fan now runs on a super low and quiet mode all the time. The first thing I have to get used to is the fan running all the time, not the sound or lack of it, just the idea. My contractor put on one of your motor's as well and assured me that there was no issue. Now I just had to wait for it to get cold, as luck would have it there was summer like weather for the past few days. The temperature went down today and I got a chance to see what the product will do. I no longer have to reach for the remote every time my furnace comes on, and I have turned the thermostat from 73 degrees to 71 degrees. The heat has come on for very short periods of time and he temp seems to be maintained. I don't want to get to excited as it is early in the process, but if this is any indication of what I can expect I truly sorry I didn't discover you a lot sooner. I have just retired from law enforcement after 36 ½ so I am home all day to monitor its performance. I will contact you again once the cold weather has set in to advise you of my progress.

    Thanks from a new fan of Fan Handler.